VisualCron Server
This page explains what the VisualCron Server is, its "On" and "Off" status, and the network port it uses. For supported systems, see Requirements.
The VisualCron Server runs in the background as the VisualCron service (named "VisualCron" in Windows Services). The service is installed with startup type Automatic. It starts with Windows and keeps running when nobody is logged on and no Client is connected. If you choose the installation type VisualCron Client only, the service is installed but disabled.
Server On and Off
Besides the service, the Server has a status, "On" or "Off". The status is "On" the first time the Server starts. After that, the Server keeps the status you last set, also when the service or the computer restarts.
When the Server is "On", Triggers start Jobs as usual.
When the Server is "Off":
- Time Triggers do not start Jobs, and Next run shows "Server off"
- Event Triggers are inactive, except those with Ignore Server Off (always run) checked, which still start their Jobs
- Jobs with Run missed Job once at start checked do not make up missed runs when the service starts
- Jobs that are already running keep running, and their Flow can still start other Jobs
- You can still run Jobs and Tasks manually, from the Client or by other means such as the Web Client
"Off" is not a full stop. Jobs that are already running continue, and Event Triggers with Ignore Server Off (always run) checked still start their Jobs. Check those Triggers before you switch the Server "Off" for maintenance. The "Off" status is kept when the service or the computer restarts, so switch the Server "On" again when you are done.
See Main - Server On/Off.
Which Server the Client shows
The Client shows the Server it is connected to in the Server [<server name>] ribbon tab, in the user and server row at the top of the Job grid, and in the status bar. To add or change server connections, see Servers - Manage Servers.
Port and firewall
Clients on other computers connect to the Server on TCP port "16444" by default. The Tray Client, and the connection that the Client creates to the Server on its own computer (see Login), use a local connection that does not go through this port. You can change the port in Server -> Main settings -> Settings -> Main settings tab -> Server port. See Main - Settings.
VisualCron does not open the port in Windows Firewall during installation or when the service starts. Next to Server port there is a button that shows whether VisualCron's own inbound rule for the port exists: Firewall allows when it does, Firewall denies when it does not. The button looks only for the rule that VisualCron creates. A rule you created yourself under another name is not detected, and the button then shows Firewall denies even when the port is open.
To allow remote Clients through Windows Firewall, complete the following steps:
- Click Server -> Main settings -> Settings.
- Open the Main settings tab.
- If the button next to Server port shows Firewall denies, click it.
The button changes to Firewall allows. To remove the rule again, click the button while it shows Firewall allows. It changes back to Firewall denies.
If you save a new Server port while the button shows Firewall allows, VisualCron moves its rule to the new port. If it cannot create the new rule, it keeps the rule for the old port.
Hardware firewalls and third-party firewall software are not changed. Open the port in those yourself. Remote Clients also cannot connect while Only allow local connections is checked on the Users/Logon tab of the same window. See Settings - Users/Logon.