Skip to main content

Create an iSCSI virtual disk for the cluster​

This is Part 1, step 3 of 5 in Install the Windows failover cluster. In this step you create the first iSCSI virtual disk on the domain and storage server, and an iSCSI target that gives every node access to it. Part 2, step 1 adds the VisualCron disk to this same target.

warning

In this guide, this first disk is for the cluster quorum (the disk witness). Do not install VisualCron on it. VisualCron gets its own disk in Part 2, step 1.

Create the virtual disk​

To create the virtual disk, complete the following steps:

  1. On the domain and storage server, in Server Manager, go to File and Storage Services -> iSCSI.
  2. Click To create an iSCSI virtual disk, start the New iSCSI Virtual Disk Wizard. The wizard opens on Select iSCSI virtual disk location.
  3. Select the disk or volume to store the iSCSI virtual disk on.
  4. Click Next. The Specify iSCSI virtual disk name page opens.
  5. Enter a name and, if you want, a description.
  6. Click Next. The Specify iSCSI virtual disk size page opens.
  7. Enter the size of the disk. A disk witness needs at least 512 MB; 1 GB is enough.
  8. Click Next. The Assign iSCSI target page opens.

Create the target​

To create the target, complete the following steps:

  1. Select New iSCSI target.
  2. Click Next. The Specify target name page opens.
  3. Enter a target name and, if you want, a description.
  4. Click Next. The Specify access servers page opens.

Give every node access​

To give the nodes access, complete the following steps:

  1. Click Add. The Add initiator ID window opens.
  2. Select Query initiator computer for ID.
  3. Click Browse. The Select Computer window opens.
  4. Enter the name of a node. To search Active Directory instead, click Advanced.
  5. Click OK.
  6. Click OK in Add initiator ID. The node is added to the access servers.
  7. Repeat steps 1 to 6 for every node. If a node has already connected to this server, you can select it from the initiator cache on the target server instead.

Finish the wizard​

To finish the wizard, complete the following steps:

  1. When every node is listed, click Next. The Enable authentication page opens.
  2. If you use CHAP, set it up.
  3. Click Next. The Confirm selections page opens.
  4. Check the settings.
  5. Click Create.
  6. On the View results page, when the virtual disk is created, click Close. The new iSCSI virtual disk and its target are listed under iSCSI.

Next step​

Connect the nodes to the iSCSI disk